TOP  Site Map   Search Pages   Japanese version
  |  Introduction   |  Labs   |  Syllabus   |  Admission   |  Links   |  Inquiry  |
TOP > Labs > Mechanicsl of Materials > TERADA Kenjiro

PROFILE

*

NAME

TERADA, Kenjiro

 *

TITLE

Professor (International Research Institute of Disaster Science)
*

FIELD

Computational Engineering and Sciences
*

UNIVERSITY

Nagoya University [1990]
*

GRADUATE SCHOOL

The University of Michigan [1996]
*

EMAIL

email_address
*

PHONE

+81-22-752-2134
*

FAX

+81-22-752-2133
*

SUBJECTS

Computational Mechanics for Heterogeneous Materials and Structures

Numerical Methods for Multiscale and Multiphysics Problems

Multi-stage hypercomplex disaster simulations

Computational Durability Science

Topology optimization


*

PUBLICATIONS

International Journals

  1. Mao KURUMATANI, Kenjiro TERADA, Junji KATO, Takashi KYOYA, Kazuo KASHIYAMA, An isotropic damage model based on fracture mechanics for concrete, Engineering Fracture Mechanics, Accepted.
  2. Kenjiro Terada1, Norio Hirayama, Koji Yamamoto, Mayu Muramatsu, Seishiro Matsubara and Shin-nosuke Nishi, Numerical plate testing for linear two-scale analyses of composite plates with in-plane periodicity, International Journal for Numerical Methods in Engineering, Vol. 105, pp. 111–137, 2016 (DOI: 10.1002/nme.4970)
  3. Mayu Muramatsu, Kenjiro Terada, Tatsuya Kawada, Keiji Yashiro, Ken Takahashi, Shinsuke Takase, Characterization of time-varying macroscopic electro-chemo-mechanical behavior of SOFC subjected to Ni-sintering in cermet microstructures, Computational Mechanics, Vol. 56, Issue 4 (2015), Page 653-676 (DOI: 10.1007/s00466-015-1193-7)
  4. Junji Kato, Hiroya Hoshiba, Shinsuke Takase, Kenjiro Terada, Takashi Kyoya, Analytical sensitivity in topology optimization for elastoplastic composites, Structural and Multidisciplinary Optimization, Volume 52, Issue 3, pp 507-526 (DOI:10.1007/s00158-015-1246-8)
  5. Kenjiro Terada, Norio Hirayama, Koji Yamamoto, Junji Kato,Takashi Kyoya, Seishiro Matsubara, Yusuke Arakawa, Yuta Ueno and Naohiro Miyanaga, Applicability of micro-macro decoupling scheme to two-scale analysis of fiber-reinforced plastics, Advanced Composite Materials, Volume 23, Issue 5-6, pp. 421-450, 2014.
  6. Junji Kato, Keiichiro Ishii, Kenjiro Terada, Takashi Kyoya, Layout design of rockbolts for natural ground reinforcement, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 38, pp. 236-255, 2014.
  7. Junji Kato, Daishun Yachi, Kenjiro Terada, Takashi Kyoya, Topology optimization of micro-structure for composites applying a decoupling multi-scale analysis, Structural and Multidisciplinary Optimization, (2014), Volume 49, Issue 4 , pp 595-608.
  8. K. Terada, J. Kato, N. Hirayama, T. Inugai, K. Yamamoto, A method of two-scale analysis with micro-macro decoupling scheme: application to hyperelastic composite materials, Computational Mechanics, Volume 52, Issue 5, pp 1199-1219, November 2013.
  9. Kazuyuki NAKAHATA, Kenjiro TERADA, Takashi KYOYA, Makoto TSUKINO, Keizo ISHII, Simulation of ultrasonic and electromagnetic wave propagation for nondestructive testing of concrete using image–based FIT, Journal of Computational Science and Technology, Vol.6, No.1, pp. 28-37, 2012
  10. Mao KURUMATANI, Kenjiro TERADA, A method of global-local analyses of structures involving local heterogeneities and propagating, Structural Engineering and Mechanics, Vol. 38, No. 4, pp. 529-547, 2011
  11. Takashi YAMAMOTO, Shinichi MARUYAMA, Kenjiro TERADA, Kazuhiro IZUI, Shinji NISHIWAKI, A generalized macroscopic model for sound-absorbing poroelastic media using the homogenization method, Computer Methods in Applied Mechanics and Engineering, Vol. 200, pp. 251-264, 2011
  12. Kenjiro Terada and Mao Kurumatani: Two-scale diffusion-deformation coupling model for material deterioration involving micro-crack propagation, International Journal for Numerical Methods in Engineering, Vol. 83, Issue 4, pp.426-451, 2010
  13. K. Terada, M. Kurumatani, T. Ushida, N. Kikuchi: A method of two-scale thermo-mechanical analysis for porous solids with micro-scale heat transfer, Computational Mechanics, Vol.46, Number 2, 269-285, 2010
  14. Ikumu WATANABE and Kenjiro TERADA: A method of predicting macroscopic yield strength of polycrystalline metals subjected to plastic forming by micro-macro de-coupling scheme, International Journal of Mechanical Sciences, Vol.52 (2) pp. 343-355, 2010
  15. Shigenobu Okazawa, Hideyuki Terasawa, Mao Kurumatani, Kenjiro Terada and Kazuo Kashiyama: Eulerian finite cover method for solid dynamics, International Journal of Computational Methods, Vol.7 (1) pp. 33-54, 2010
  16. Mao KURUMATANI and Kenjiro TERADA: Finite cover method with multi-cover-layers for the analysis of evolving discontinuities in heterogeneous media, International Journal for Numerical Methods in Engineering, Vol.79, Issue 1, pp.1-24, 2009
  17. Ikumu WATANABE Kenjiro TERADA Eduardo Alberto de Souza NETO Djordje PERIC: Characterization of macroscopic tensile strength of polycrystalline metals with two-scale finite element analysis, Journal of the Mechanics and Physics of Solids, Vol. 56, Issue 3, pp. 1105-1125.
  18. Shinji NISHIWAKI, Yasunori MAEDA, Kazuhiro IZUI, Masataka YOSHIMURA, Kazumi MATSUI, Kenjiro TERADA: Topology optimization of mechanical structures targeting vibration characteristics, Journal of Environment and Engineering, Vol.2, No.3, pp. 480—492, 2007
  19. Kenjiro TERADA, Ikumu WATANABE: Computational aspects of tangent moduli tensors in rate-independent crystal elastoplasticity, Computational Mechanics, 40, 497-511, 2007.
  20. Kenjiro TERADA, Atsushi MARUYAMA, Mao KURUMATANI: Eulerian finite cover method for quasi-static equilibrium problems of hyperelastic bodies, Communications in Numerical Methods in Engineering, Vol. 23, Issue 12, pp. 1081-1094, 2006.
  21. Kenjiro TERADA, Ikumu WATANABE, Masayoshi AKIYAMA: Effects of shape and size of crystal grains on the strengths of polycrystalline metals, International Journal for Multiscale Computational Engineering Vol. 4, Issue 4, pp. 445-460, 2006.
  22. Isao SAIKI, Ken OOUE, Kenjiro TERADA, Akinori NAKAJIMA: Multi-scale modeling for planar lattice microstructures with structural elements, International Journal for Multiscale Computational Engineering, Vol. 4, Issue 4, pp. 429-443, 2006.
  23. Kenjio TERADA, Tateki ISHII, Takashi KYOYA,Yuji KISHINO: Finite cover method for progressive failure with cohesive zone fracture  in heterogeneous solids and structures, Computational Mechanics, Published Online: 9 Dec. 2005
  24. Tateki ISHII, Kenjiro TERADA, Takashi KYOYA: Failure analysis of quasi-brittle materials involving multiple mechanisms on fractured surfaces, International Journal for Numerical Methods in Engineering, Vol. 67, Issue 7, pp. 960-988, 2006
  25. Yasunori MAEDA Shinji NISHIWAKI, Kazuhiro IZUI, Mitsutaka YOSHIMURA, Kazumi MATSUI, Kenjiro TERADA: Structural optimization of vibrating structures with specified eigen-frequencies and eigen-mode shapes, International Journal for Numerical Methods in Engineering, Vol. 67, Issue 5, pp. 597-628, 2006
  26. Kenjiro TERADA, Mao Kurumatani: An integrated procedure for three-dimensional structural analysis with the finite cover method, International Journal for Numerical Methods in Engineering, Vol. 63, Issue 15, pp.2102-2123, 2005.
  27. Masayoshi AKIYAMA, Yutaka NEISHI, Akira TANIYAMA, Kenjiro TERADA:  Direct observation of microscopic plastic deformation of stainless steel using lattice drawn by focused ion beam of Ga+, Materials Science and Technology, Vol. 31, No.3, pp. 274-280, 2005.
  28. Mao Kurumatani, Kenjiro TERADA: Finite cover method with mortar elements for elastoplasticity problems, Computational Mechanics, Vol.36, No. 1, pp.45-61, 2005.
  29. Ikumu WATANABE, Kenjiro TERADA, Masayoshi AKIYAMA: Two-scale analysis for deformation-induced anisotropy of polycrystalline metals, Computational Materials Science, Vol. 32, No.2, pp. 240-250, 2005.
  30. Kenjiro TERADA, Mao KURUMATANI: Performance assessment of generalized elements in the finite cover method, Finite Elements in Analysis and Design, Vol.41, No.2, pp.111-132, 2004.
  31. Kenjiro TERADA, Kazumi MATSUI, Masayoshi AKIYAMA, Takashi KUBOKI: Numerical re-examination of the micro-scale mechanism of the Bauschinger effect in carbon steels, Computational Materials Science, 31 (1-2), 67-83, 2004.
  32. Kazumi MATSUI, Kenjiro TERADA: Continuous approximation of material distribution for topology optimization, International Journal for Numerical Methods in Engineering, 59 (14) pp. 1925-1944, 2004.
  33. K. Matsui, K. Terada, K. Yuge: Two-scale finite element analysis of heterogeneous solids with periodic microstructures, Computers and Structures 82 (7-8), pp. 593-606, 2004.
  34. Masayoshi AKIYAMA, Yutaka NEISHI, Yoshitaka ADACHI, Kenjiro TERADA: Trigger for the occurrence of grain coarsening phenomenon of BS304S31 austenite stainless steel under small plastic strain at high temperature, Engineering Computations, Vol. 20, No. 5/6, pp. 499-512, 2003.
  35. Kenjiro TERADA, Mitsuteru ASAI, Michihiro YAMAGISHI: Finite cover method for linear and nonlinear analyses of heterogeneous solids, International Journal for Numerical Methods in Engineering, Vol. 58, No. 9, pp. 1321-1346, 2003.
  36. Kenji KANEKO, Kenjiro TERADA, Takashi KYOYA, Yuji KISHINO: Global-local analysis of granular media in quasi-static equilibrium, International Journal of Solids and Structures, Vol. 40, No. 15, pp. 4043-4069, 2003.
  37. Kenjiro TERADA, Isao SAIKI, Kazumi MATSUI, Yuki YAMAKAWA: Two-scale kinematics and linearization for simultaneous two-scale analysis of periodic heterogeneous solids at finite strain, Computer Methods in Applied Mechanics and Engineering, Vol.192, Issues 31-32, pp. 3531-3563, 2003.
  38. Masayoshi AKIYAMA, Takashi KUBOKI, Kenji OIKAWA, Kazumi MATSUI, Kenjiro TERADA: Influence of carbon content and carbide morphology of carbon steels on the stress-strain curve in the vicinity of yield point, Materials Science and Technology, Vol. 18, pp. 1272-1278, 2002.
  39. Kenjiro Terada, Takashi KYOYA, Motoki KAZAMA, Kiho LEE, Lizhu OYANG, Image-based modeling and analysis of microstructures for two-scale problems in geomechanics, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 26, Issue 3, pp. 273-297, 2002.
  40. Isao SAIKI, Kenjiro TERADA, Kiyohiro IKEDA, Muneo HORI: Appropriate number of unit cells in a representative volume element for micro-structural bifurcation encountered in a multi-scale modeling, Computer Methods in Applied Mechanics and Engineering, Vol. 191, Issues 23-24, pp. 2561-2585, 2002.
  41. Naoki TAKANO, Mazaru ZAKO, Toru OKAZAKI, Kenjiro TERADA: Microstructure-based evaluation of the influence of woven architecture on permeability by asymptotic homogenization theory, Composites Science and Technology, Vol. 62, Issues 10-11, pp. 1347-1356, 2002.
  42. Kiyohiro IKEDA, Kai OIDE, Kenjiro TERADA: Imperfection sensitive variation of critical loads at hilltop bifurcation point, International Journal of Engineering Science, Vol. 40, Issue 7, pp. 743-772, 2002.
  43. Sigenobu OKAZAWA, Kai OIDE, Kiyohiro IKEDA, Kenjiro TERADA: Imperfection sensitivity and probabilistic variation of tensile strength of steel members, International Journal of Solids and Structures, Vol. 39, Issue 6, pp. 1651-1671, 2002
  44. Kiyohiro IKEDA, Sigenobu OKAZAWA, Kenjiro TERADA, Hirohisa NOGUCHI, Tsutomu USAMI: Recursive bifurcation of tensile steel specimens, International Journal of Engineering Science, Vol. 39, Issue 17, pp. 1913-1934, 2001.
  45. Kazumi MATSUI, Kenjiro TERADA, Kohei YUGE: Parallelized two-scale analysis with a PC cluster for elastic-plastic heterogeneous media, JSME International Journal, Series A, Vol. 44, pp. 584-593, 2001.
  46. Kenjiro TERADA, Noboru KIKUCHI: A class of general algorithms for multi-scale analyses of heterogeneous media, Computer Methods in Applied Mechanics and Engineering, Vol. 190, Issues 40-41, pp. 5427-5464, 2001.
  47. Kenjiro TERADA, Muneo HORI, Takashi KYOYA, Noboru KIKUCHI: Simulation of the multi-scale convergence in computational homogenization approaches, International Journal of Solids and Structures, Vol. 37, Issue 16, pp. 2285-2311, 2000.
  48. Kazuo MUROTA, Kiyohiro IKEDA, Kenjiro TERADA: Bifurcation mechanism underlying echelon-mode formation, Computer Methods in Applied Mechanics and Engineering, Vol. 170, Issues 3-4, pp. 423-448, 1999.
  49. Takashi KYOYA, Kenjiro TERADA, Toshikazu KAWAMOTO: Multi-scale limit load analysis for discontinuous rock mass based on the homogenization method, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 23, Issue 10, pp. 995-1019, 1999.
  50. Kenjiro TERADA, Takashi ITO, Noboru KIKUCHI, Characterization of the mechanical behaviors of solid-fluid mixture by the homogenization method, Computer Methods in Applied Mechanics and Engineering, Vol. 153, Issues 3-4, pp. 223-257, 1998
  51. Kenjiro TERADA, Katsuyuki SUZUKI and Hideomi OHTSUBO: FFT-Based homogenization algorithm using digital images, Materials Science Research International, Vol. 3, No. 4, pp. 231-236, 1997.
  52. Kenjiro TERADA, Tomohiko MIURA, Noboru KIKUCHI: Digital image-based modeling applied to the homogenization analysis of composite materials, Computational Mechanics, Vol. 20, No. 4, pp. 331-346, 1997.
  53. Dariusz GOLANSKI, Kenjiro TERADA, Noboru KIKUCHI: Macro and micro scale modeling of thermal residual stresses, in metal matrix composite surface layers by the homogenization method, Computational Mechanics, Vol. 19, No. 3, pp. 188-202, 1997.
  54. Kenjiro TERADA, Noboru KIKUCHI: Global-Local constitutive modeling of composite materials by the homogenization method, Materials Science Research International, Vol. 2, No. 2, pp. 73-80, 1996.
  55. Kenjiro TERADA, Noboru KIKUCHI: Microstructural design of composites using the homogenization method and digital images, Materials Science Research International, Vol. 2, No. 2, pp. 65-72, 1996.

Domestic Journals

  1. Shuji MORIGUCHI, Yuta HIRUMA, Shinsuke TAKASE, Kenjiro TERADA, Effects of element size and element shape in flow simulations using DEM, Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Accepted.
  2. Junji KATO, Ryosuke KASAI, Takashi KYOYA and Kenjiro TERADA, Evaluation of Micro-crack Distribution using Inverse Homogenization Method, Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Accepted.
  3. Reika NOMURA, Shinsuke TAKASE, Kenjiro TERADA and Shuji MORIGUCHI, Multiscale numerical experiment for evaluating disaster-reduction characteristics of tide-protection forest, Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Accepted.
  4. Shinsuke TAKASE, Shuji MORIGUCHI, Kenjiro TERADA, Naoki KOYAMA, Kenji KANEKO, Mao KURUMATANI, Junji KATO and Takashi KYOYA, Finite cover based fluid-structure interaction analysis including fracture of structure, Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Accepted.
  5. Seishiro MATSUBARA, Kenjiro TERADA, Finite strain viscoelasto-viscoplastic constitutive model for thermoplastic resins in consideration of self-heating phenomenon, Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Accepted.
  6. Shinnosuke NISHI, Kenjiro TERADA, Junji KATO, Topology optimization of cross-section structure for thick composite plate, Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Accepted.
  7. Takashi USHIDA, Kiwamu TSUNO, Takashi NAKAYAMA, Shinsuke TAKASE, Kenjiro TERADA and Takashi KYOYA, A prediction model of steel corrosion in concrete based on reaction-diffusion equation, Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Accepted.
  8. Shuji MORIGUCHI，Yu OTAKE，Shinsuke TAKASE，Kenjiro TERADAYuji KOSAKA, Masaru HORIUCHI, Kazuhide SAWADA, Atsushi YASHIMA, Probabilistic risk evaluation of rockfall using DEM, Japanese Geotechnical Journal, Vol.10，No.4，503-515, 2015.
  9. Takashi USHIDA, Takashi NAKAYAMA, Kiwamu TSUNO, Keisuke SHIMAMOTO, Shinji YAKITA, Kenjiro TERADA and Takashi KYOYA, Field data analysis and future prediction method of material deteriorations in cut-and-cover tunnels, Ser. F1 (Tunnel Engineering), Vol.71，No.1，pp.41-53，2015
  10. Yuki YAMAKAWA, Hiroki MIZOE, Yutaka CHIDA, Jo TODA, Kiyohiro IKEDA, Hiroshi TAMURA, Kenjiro TERADA, Uplift capacity analysis of anchor foundation for transmission tower on slope crest, Journal of Japan Society of Civil Engineers, Ser. C (Geosphere Engineering), Vol. 71, No. 1 p. 1-13, 2015
  11. Yuichi Shintaku, Mayu Muramatsu, Shinsuke Takase, Seiichiro Tsutsumi and Kenjiro Terada, Cohesive Crack Model to Reflect Local Chemical Action at Grain and its boundaries in polycrystalline metals, Quarterly Journal of The Japan Welding Society, Vol. 33，No. 2, pp. 152s-155s, 2015
  12. Seiichiro Tsutsumi, Riccardo Fincato, Kazushi Ueda and Kenjiro Terada, A Crystal Plasticity FE Analysis Considering Mechanically Induced Martensitic Phase Transformation, Quarterly Journal of The Japan Welding Society, Vol. 33，No. 2, 102s-106s, 2015
  13. Junji KATO, Yoshiki KAMO, Shinsuke TAKASE, Shuji MORIGUCHI, Mao KURUMATANI, Kenjiro TERADA, Takashi KYOYA, Prelimineary investigation of phase-filed topology optimization for microstructures, Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 70 (2014) No. 2 p. I_173-I_183
  14. Shinsuke TAKASE, Junji KATO, Shuuji MORIGUCHI, Kenjiro TERADA, Takashi KYOYA, Kazuya NOJIMA, Masaaki SAKURABA, Kazuo KASHIYAMA, Tsunani simulation using 2D-3D hybrid method based on stabilized finite element method, Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 70 (2014) No. 2, I_307-I_315, 2014.
  15. Hiroya HOSHIBA, Junji KATO, Shinsuke TAKASE, Kenjiro TERADA, Takashi KYOYA, Multiphase topology optimization considering elastoplastic cyclic deformation and accuracy validation of analytical sensitivity, Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 70 (2014) No. 2, p.I_317-I_328, 2014
  16. Ikkoh TACHIBANA, Shuji MORIGUCHI, Kenjiro TERADA, Shinsuke TAKASE, Takashi KYOYA, Jyunji KATO, Quantitative relationship between shape representation quality and calculation accuracy, Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 70 (2014) No. 2, p.I_519-I_530, 2014
  17. Kenjiro TERADA, Norio HIRAYAMA, Koji YAMAMOTO and Seishiro MATSUBARA, Numerical plate testing for linear multi-scale analyses of composite plates, Transactions of the Japan Society for Computational Engineering and Science, p.20150001.
  18. Yuichi SHINTAKU, Mayu MURAMATSU, Seiichiro TSUTSUMI, Kenjiro TERADA, Takashi KYOYA Junji KATO and Shuji MORIGUCHI, An analysis of fatigue crack propagation in polycrystalline metals using cohesive zone model with damage variable, Transactions of the Japan Society for Computational Engineering and Science, p.20140014.
  19. Junji KATO, Hiroya HOSHIBA, Shinsuke TAKASA, Kenjiro TERADA and Takashi KYOYA, Accuracy validation of analytical sensitivity in topology optimization for elastoplastic composites, Transactions of the Japan Society for Computational Engineering and Science, p.20140012.
  20. Shinya KAMINO, Mao KURUMATANI, Kenjiro TERADA, Takashi KYOYA and Kazuo KASHIYAMA, Simulation of compressive failure in quasi-brittle materials involving contact on crack interfaces, Transactions of the Japan Society for Computational Engineering and Science, p.20140006, 2014.
  21. Seishiro Matsubara, Yusuke Arakawa, Junji Kato, Kenjiro Terada, Takashi Kyoya, Yuta Ueno, Naohiro Miyanaga, Norio Hirayama, Koji Yamamoto, De-coupled multi-scale analyses of fiber-reinforced composites by elastic-creep-damage combined model, Transactions of the Japan Society for Computational Engineering and Science, p.20140004, 2014.
  22. Daishun YACHI, Junji KATO, Shinsuke TAKASE, Kenjiro TERADA, Takashi KYOYA, Analytical sensitivity analysis for decoupling multi-scale topology optimization of composites, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2013, p. 20130022, 2013.
  23. Tomohiro ISHIDA, Shinpei SHIBUTANI, Junji KATO, Kenjiro TERADA, Takashi KYOYA, Daisuke ANDO, Junichi KOIKE, Deformation and strength characterization of Mg alloys with rolled crystallographic textures by crystal plasticity finite element method, Transactions of JSME, Series A, 79(808), 1840-1851, 2013.
  24. Mao KURUMATANI, Kenjiro TERADA, Junji KATO, Takashi KYOYA, Kazuo Kashiyama, An isotropic damage model based on fracture mechanics for concrete and its evaluation, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2013, p. 20130015, 2013.
  25. Mao KURUMATANI, Kenjiro TERADA, Takashi KYOYA, Junji KATO, Kazuo Kashiyama, Discrete analysis method for fracture simulation using structural elements, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2013, p. 20130010, 2013.
  26. Mao KURUMATANI, Sinya KAMINO, Kenjiro TERADA, Simulation of compressive failure in concrete by focusing on heterogeneity due to coarse aggregates, Journal of Japan Society of Civil Engineers, Ser. A2, Vol. 69, No. 2 p. I_115-I_123, 2013.
  27. Junji KATO, Daishun YACHI, Shinsuke TAKASE, Kenjiro TERADA, Takashi KYOYA, Three dimensional multi-scale topology optimization of composites, Journal of Japan Society of Civil Engineers, Ser. A2, Vol. 69, No. 2 p. I_133-I_144, 2013.
  28. Mao KURUMATANI, Kenjiro TERADA, A comparative study on PU-based finite element methods for approximating strong/weak discontinuities, Journal of Japan Society of Civil Engineers, Ser. A2, Vol. 68, No. 2 p. I_129-I_138, 2012.
  29. Junji KATO, Kenjiro TERADA, Takashi KYOYA, Topology optimization of microstructure for composites considering macroscopic structural response, Journal of Japan Society of Civil Engineers, Ser. A2, Vol. 68, No. 2 p. I_279-I_287, 2012.
  30. Tomohiro ISHIDA, Shinpei SHIBUTANI, Junji KATO, Kenjiro TERADA, Takashi KYOYA, Daisuke ANDO, Junichi KOIKE, A new constitutive model for crystal plasticity with deformation twinning, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2012, P 20120014, 2012.
  31. Takashi SASAGAWA, Ken TAKAHASHI, Kenjiro TERADA, Tatsuya KAWADA, Estimation of macroscopic material properties using sintering simulation of porous microstructure affected by mechanical effects, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2012, P 20120004, 2012.
  32. Masato NAKAMURA, Shinsuke TAKASE, Kazuo KASHIYAMA, Kenjiro TERADA, Mao KURUMATANI, A Simulation method for fluid-structure interaction problems with free surface based on the finite cover method, Journal of Japan Society of Civil Engineers, Ser. A2, Vol. 67, No. 2 P I_199-I_208, 2011.
  33. Junji KATO, Keiichiro ISHII, Kenjiro TERADA, Takashi KYOYA, Numerical investigation of optimal layout of rockbolts for ground structures, Journal of Japan Society of Civil Engineers, Ser. A2, Vol. 67, No. 2 P I_107-I_116, 2011.
  34. Junji KATO, Ekkehard RAMM, Kenjiro TERADA, Takashi KYOYA, Material shape-optimization for fiber-reinforced composites applying a damage formulation, Journal of Japan Society of Civil Engineers, Ser. A2, Vol. 67, No. 1, pp. 54-68, 2011.
  35. Junji KATO, Ekkehard RAMM, Kenjiro TERADA, Takashi KYOYA, Multiphase material optimization for fiber-reinforced composites considering strain softening, Journal of Japan Society of Civil Engineers, Ser. A2, Vol. 67, No. 1, 2011.
  36. Mao KURUMATANI, Kenjiro TERADA, Takashi KYOYA, Study on wave propagation analyses in heterogeneous materials using X-FEM, Journal of Japan Society of Civil Engineers, Ser. A2, Vol. 67, No. 1, 2011.
  37. Takashi YAMAMOTO, Shinichi MARUYAMA, Kazuhiro IZUI, Shinji NISHIWAKI, Kenjiro TERADA, Equivalent properties of sound absorbing poroelastic material using the homogenization method, Transactions of JSME, Series C, 77(773), 75-88, 2011.
  38. Takashi YAMAMOTO, Shinichi MARUYAMA, Kazuhiro IZUI, Shinji NISHIWAKI, Kenjiro TERADA, A model for sound-absorbing poroelastic material using multiscale analysis, Transactions of JSME, Series C, 76(768), 2039-2048, 2010.
  39. Mao KURUMATANI, Kenjiro TERADA, Norio TAKEUCHI, Meso-scale behavior of fracture process zone in quasi-brittle materials induced by micrp-crack interaction, Journal of Japan Society of Civil Engineers, Series A, Vol. 66, No. 3, pp. 505-515, 2010.
  40. Ikumu WATANABE, Kenjiro TERADA, An evaluation method of macroscopic yield strength for polycrystalline metals subjected to plastic forming by micro-macro decoupling analysis, Transactions of JSME, Series A, 76(766), 752-760, 2010.
  41. Akira ISHIKAWA, Kenjiro TERADA, Takashi KYOYA, Yasuhiro SHAMOTO, Verification of multi-scale analysis for partially improved grounds by centrifugal experiments and its application to in-situ load-settlement problem, Journal of Japan Society of Civil Engineers, Series C, Vol. 66, No. 2, pp. 332-341, 2010.
  42. Akira ISHIKAWA, Kenjiro TERADA, Takashi KYOYA, Yasuhiro SHAMOTO, Multi-scale analysis method for partially improved grounds by using a newly proposed nonlinear elastic constitutive model, Journal of Japan Society of Civil Engineers, Series C, Vol. 66, No. 1, pp. 145-155, 2010.
  43. Kenjiro TERADA, Yasuaki HAMANA, Norio HIRAYAMA, A Method of viscoelastic two-scale analyses for FRP, Transactions of JSME, Series A, 75(760), pp. 1674-1683, 2009.
  44. Mao KURUMATANI, Kenjiro TERADA, Mechanism of size effect in quasi-brittle materials by focusing on the micro-crack formations, Journal of Japan Society of Civil Engineers, Series A, Vol. 65, No. 1, pp. 216-227, 2009.
  45. Mao KURUMATANI, Kenjiro TERADA, Takashi KYOYA, Tomohisa HASHIZUME, A method of discrete crack growth analysis for quasi-brittle materials and numerical study of mixed-mode fracture of concrete, Journal of Japan Society of Civil Engineers, Series A, Vol. 65, No. 1, pp. 165-177, 2009.
  46. Mao KURUMATANI, Kenjiro TERADA, Hiroshi OKUMURA, Multi-scale thermo-elastic coupled analysis of porous media based on the homogenization method in consideration of the size of microstructures, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2008, P 20080029, 2008.
  47. Kenjiro TERADA, Takenori INUGAI, Yasuaki HAMANA, Akio MIYORI, Norio HIRAYAMA, Parameter identification for anisotropic hyperelastic materials by numerical material testing, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2008 (2008) P 20080024.
  48. Kenjiro TERADA, Takenori INUGAI, Norio HIRAYAMA, A Method of Numerical Material Testing in Nonlinear Multiscale Material Analyses, Transactions of JSME, Series A, 74(744), 1084-1094, 2008.
  49. Mao KURUMATANI, Kenjiro TERADA, Multi-scale multi-physics analysis for deterioration of quasi-brittle materials involving micro-crack propagations, Journal of Japan Society of Civil Engineers, Series A, Vol. 64, No. 2, pp. 363-375, 2008.
  50. Mao KURUMATANI, Kenjiro TERADA, Development of global-local finite cover method and its application to the analysis of crack growth in concrete due to reinforcement corrosion, Journal of Japan Society of Civil Engineers, Series A, Vol. 64, No. 1, pp. 16-26, 2008.
  51. Mao KURUMATANI, Kenjiro TERADA, An explicit solution algorithm for cohesive crack model and its evaluation, Journal of Japan Society of Civil Engineers, Series A, Vol. 64, No. 3, pp. 627-638, 2008.
  52. Ikumu WATANABE, Kenjiro TERADA, Masayoshi AKIYAMA, Grain dize dependence of tensile strength of polycrystalline metals by crystal-plasticity-damage multi-scale analyses, Transactions of JSME, Series A, 74(739), 412-418, 2008.
  53. Mao KURUMATANI, Kenjiro TERADA, A method for crack propagation analysis incorporated with nodal-integration FEM, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2008, P 20080002, 2008.
  54. Mao KURUMATANI, Takashi KOJIMA, Kenjiro TERADA, Performance assessment of nodal-integration finite element method, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2007, P 20070015, 2007.
  55. Mao KURUMATANI, Kenjiro TERADA, Makoto HISADA, On analysis models of reinforced corrosion and their crack behavior of concrete, Journal of Japan Society of Civil Engineers, Series A, Vol. 63, No. 1, pp. 167-178, 2007.
  56. Mao KURUMATANI, Kenjiro TERADA, Finite cover method with multi-cover modeling -Fracture simulation of quasi-brittle heterogeneous solids-, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2006, P 20060029, 2006.
  57. Mao KURUMATANI, Kenjiro TERADA, A multi-scale heat conduction analysis method for porous media in consideration of microscopic heat transfer, Journal of Japan Society of Civil Engineers, Series A, Vol. 62, No. 4, pp. 822-834, 2006.
  58. Ikumu WATANABE, Kenjiro TERADA, Multi-scale analysis for polycrystalline metals with continuum damage model, Journal of Japan Society of Civil Engineers, Series A, Vol. 62, No. 4, pp. 772-781, 2006.
  59. Mao KURUMATANI, Kenjiro TERADA, A multi-scale multi-physics analysis method for mass concentration and deformation problems, Journal of Japan Society of Civil Engineers, Series A, Vol. 62, No. 2, pp.425-439, 2006.
  60. Tateki ISHII, Takashi KYOYA, Kenjiro TERADA, Yuji KISHINO, Failure analysis involving frictional contact on crack interfaces, Journal of Japan Society of Civil Engineers, Series A, 62(2), 371-383, 2006.
  61. Mao KURUMATANI, Kenjiro TERADA, On finite element mesh connection methods for domain decomposition problems, Journal of Japan Society of Civil Engineers, Series A, JSCE, 62(2), 345-361, 2006.
  62. Mao KURUMATANI, Kenjiro TERADA, Examination of finite cover approximations for imposing interface compatibility conditions in generalized elements - A sort of patch test -, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2006, Paper No. 20060014, 2006.
  63. Masayoshi, AKIYAMA, Kazumi MATSUI, Kenjiro TERADA, Analysis of microscopic yielding behaviour of carbon steel under macroscopic loading, TETSU-TO-HAGANE, Vol.91, No.11, pp. 803-808, 2005.
  64. Mao Kurumatani, Kenjiro Terada, Approximation properties of generalized elements in higher-order finite cover approximation, Proceedings of JSCE, 794, pp. 131-142, 2005.
  65. Tateki ISHII, Kenjiro TERADA, Takashi KYOYA, Yuji KISHINO, Development of fracture simulation by the finite cover method using interface element, Proceedings of JSCE, 794/I-72, pp. 213-225, 2005.
  66. Ikumu Watanabe, Kenjiro Terada, A study on stress update algorithm and linearization scheme for single crystal plasticity, Transactions of the Japan Society for Computational Engineering and Science , Vol. 2005, Paper No.20050014, 2005.
  67. Yasunori MAEDA, Shinji NISHIWAKI, Kazuhiro IZUI, Masataka YOSHIMURA, Kazumi MATSUI, Kenjiro, TERADA, Topology optimization of mechanical structures targeting vibration characteristics, Transactions of the JSME, Series C, 71(703), 813-820, 2005.
  68. Ikumu WATANABE, Kenjiro TERADA, Kazumi MATSUI, Masayoshi AKIYAMA, Yutaka NEISHI, Evaluation of induced anisotropy in polycrystalline metals based on homogenization method, 70(699), Transactions of the JSME, Series A, 1558-1565, 2004.
  69. Akira HOSOYAMA, Shinji NISHIWAKI, Kazuhiro IZUI, Masataka YOSHIMURA, Kazumi MATSUI, Kenjiro TERADA, Structural topology optimization of compliant mechanisms: In cases where the ratio of the displacement at the input location to the displacement at the output location is included in an objective function, Transactions of the JSME, Series C,  70(696), 2384-2391, 2004-08-25.
  70. Mitsuteru Asai, Michihiro Yamagishi, Kenjiro Terada, Gakuji Nagai, A non-local voxel finite element method and its application to failure analysis, Proceedings of JSCE, 759, pp. 233-245, 2004.
  71. Mao Kurumatani, Kenjiro Terada, Approximation properties of generalized elements in finite cover method, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2003, Paper No. 20030027, 2003.
  72. Kai Oide, Tsuyoshi Ichimura, Yoshiteru Ishibashi, Kenjiro Terada, Hierarchical finite elements for average behavior of composite structures, Proceedings of JSCE, 745, pp. 15-24, 2003.
  73. Yuki Yamakawa, Kiyohiro Ikeda, Kenjiro Terada, Keisuke Satoh, Kunio Torii, Finite deformation analysis for shear band bifurcation mode and progress of discontinuous displacement field, Journal of Geotechnical Engineering, JSCE, No.743/III-64, pp. 59-76, 2003.
  74. Kazumi Matsui, Kenjiro Terada, Topology optimization method by continuous approximation of material distribution, Transactions of the JSME, Series A, 69(684), 1257-1264, 2003.
  75. Isao Saiki, Ken Ooue, Kenjiro Terada, Akinori Nakajima, Multi-scale analysis of cellular materials with drame elements by nonlinear Homogenization, Transactions of the JSME, Series A, 69(680), 786-793, 2003.
  76. Mitsuteru ASAI, Kenjiro TERADA, Kiyohiro IKEDA, Hiroyuki SUYAMA, Katashi FUJII, Meso-scopic numerical analysis of concrete structures by a modified lattice model, Journal of Structural Mechanics and Earthquake Engineering, JSCE, Vol. 20, No.1, pp. 43s-54s, 2003.
  77. Ken Ooue, Isao Saiki, Kenjiro Terada, Akinori Nakajima, Nonlinear multiscale modeling with frame elements for cellular materials, Proceedings of JSCE, 724, pp. 249-256, 2003.
  78. Kazumi Matsui, Kenjiro Terada, Masayoshi Akiyama, Takashi Kuboki, Kenji Oikawa, Mechanism of the Bauschinger Effect by the Multi-Scale Modeling, Transactions of the JSME, Series A, 68(675), 1559-1566, 2002.
  79. Kai Oide, Kiyohiro Ikeda, Kenjiro Terada, Katashi Fujii, Shigenobu Okazawa, Stochastic evaluation method for the strength of structural members on bifurcation theory, Proceedings of JSCE, 696, pp. 85-98, 2002.
  80. Isao Saiki, Ken Ooue, Akinori Nakajima, Kenjiro Terada, Multi-scale modeling for microstructures with structural elements and its application to cellular solids, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2002, Paper No. 20020004, 2002.
  81. Kiho Lee, Motoki Kazama, Kenjiro Terada, Undrained shear characteristics of dredged slugs mixed with crashed oyster shell, Journal of Geotechnical Engineering, No. 701/III-58, pp. 303-314, 2002.
  82. Yuki Yamakawa, Kenjiro Terada, Kiyohiro Ikeda, Kunii Torii, Bifurcation analysis and path jumping behavior of elasto-plastic bod under compression, Proceedings of JSCE, 701, pp. 73-86, 2002.
  83. Kazumi Matsui, Kenjiro Terada, Shinji Nishiwaki, Yoshiteru Ishibashi, Consistent topology optimization method for structures with finite deformation, Vol. 2001, Paper No. 20010046, 2001.
  84. Kenji Kaneko, Kenjiro Terada, Takashi Kyoya, Yuji Kishino, Development of a multiscale analysis method for granular materials based on homogenization theory, Journal of Geotechnical Engineering, No. 680/III-55, pp.183-199, 2001.
  85. Takashi Kyoya, Kenjiro Terada, A multi-scale structural analysis and its application to a strength evaluation for fissured media, Journal of Geotechnical Engineering, No. 680/III-55, pp. 49-64, 2001.
  86. Naoki Takano, Kenjiro Terada, Masaru Zako, Three-dimensional evaluation of permeability of fiber reinforced composite materials based on their microstructures, Journal of the Society of Materials Science, Japan, 50(5), pp. 488-494, 2001.
  87. Kazumi Matsui, Kenjiro Terada, Takashi Kyoya, Tetsuo Iwakuma, Estimate of the macroscopic yield surface for the elastic-plastic composite materials, Proceedings of JSCE, 682, pp. 335-346, 2001.
  88. Shigenobu Okazawa, Taiki Terasawa, Kiyohiro Ikeda, Kenjiro Terada, Shape effects of necking bifurcation in tensile specimens, Proceedings of JSCE, 675, pp. 351-354, 2001.
  89. Kenjiro TERADA, Isao SAIKI, Kazumi MATSUI, Kinematically correct formulation for two-scale finite deformation problems, Transactions of JSCES, Vol. 2000, Paper No. 20000006, 2000.
  90. Kiho Lee, Motoki Kazama, Kenjiro Terada, Eiji Yanagisawa, Permeability characteristics of dredged slugs mixed with crashed oysters, Journal of Geotechnical Engineering, No. 652/III-51, pp. 245-256, 2000.
  91. Naoki Takano, Kenjiro Terada, Masaru Zako, Tomomi Yoshioka, Evaluation of Permeability of Resin in Textile Composites by the Homogenization Method, Journal of the Japan Society for Composite Materials 26(5), 171-178, 2000.
  92. Kenjiro Terada, Kazumi Matsui, Atsushi Mano, Micro-macro modeling of nonlinear mechanical behaviors based on the homogenization theory, Transactions of the JSME, Series A, 66(643), 516-523, 2000.
  93. Kenjiro Terada, Noboru Kikuchi, A generalized algorithm for multiscale analysis of heterogeneous elastic-plastic bodies, Proceedings of JSCE, 633, 217-229, 1999.
  94. Kenjiro Terada, Takashi Kyoya, Method of multiscale stress analysis for a medium with infinitely many Fissures, Proceedings of JSCE, 619, pp. 23-33, 1999.
  95. Kenjiro Terada, Kazuyuki Nakahata, Michihiro Kitahara, An evaluation method of macroscopic shape of defects in microscopically inhomogeneous materials, Transactions of the JSME, Series A, 65(631), 552-559, 1999.
  96. Katsuyuki Suzuki, Hideomi Ohtsubo, Kenjiro Terada, Daisuke Kobayashi, Optimal design of golf club using multibody dynamics, Vol. 1999, Paper No. 19990011, 1999.
  97. Kenjiro Terada, Kazumi Matsui, Numerical solutions of multi-scale structural analyses for elastoplastic bodies, Transactions of the Japan Society for Computational Engineering and Science, Vol. 1999, Paper No. 19990008, 1999.
  98. Kenjiro Terada, Noboru Kikuchi, Microstructural modeling technique for homogenization analysis using digital images, Transactions of the JSME, Series A, 64(617), 170-177, 1998.
  99. Kenjiro Terada, Noboru Kikuchi, Application of the asymptotic homogenization method for composites with irregular material configurations, Transactions of the JSME, Series A, 64(617), 162-169, 1998.
  100. Kenjiro Terada, Tkashi Ito, Noboru Kikuchi, Viscoelastic constitutive laws as an asymptotic behavior in the homogenization method for solid-fluid mixtures, Proceedings of JSCE, 591, 99-109, 1998.
  101. Kenjiro Terada, Tkashi Ito, Noboru Kikuchi, A study on the homogenization method for solid-fluid mixtures from engineering viewpoints, Proceedings of JSCE, 591, pp. 85-97, 1998.
  102. Katsuyuki Suzuki, Kenjiro Terada, Hideomi Ohtsubo, Naoki Yonesato: The Analysis Method of Solid Structure Using Voxel Data, Journal of Marine Science and Technology, 182, pp.595-600, 1997.
  103. Kenjiro Terada, Kohei Yuge, Noboru Kikuchi: Elastoplastic Analysis of Composite Materials Using the Homogenization Method : 2nd Report, Numerical Analysis, Transactions of the JSME, Series A, 62(601), pp.2072-2079, 1996.
  104. Kenjiro Terada, Kohei Yuge, Noboru Kikuchi: Elasto-Plastic Analysis of Composite Materials Using the Homogenization Method : 1st Report, Formulation, Transactions of the JSME, Series A, 61(590), pp.2199-2205, 1995.

Journal of Applied Mechanics: JSCE (1998-2010)

  1. Mao KURUMATANI, Tatsuya YUMOTO, Kenjiro TERADA, Takashi KYOYA, Mitsuyoshi AKIYAMA, Study for evaluating fracture-toughness in quasi-brittle materials based on the energy valance of structures, Journal of Applied Mechanics: JSCE, Vol.13, pp.313-322, 2010.
  2. Takashi SASAGAWA, Mao KURUMATANI, Kenjiro TERADA, Tetsushi KANDA, Jin-Hwan JEON and Haruki MOMOSE, Strength evaluation of ultra high-strength cement paste by crack propagation analysis of microstructure, Journal of Applied Mechanics: JSCE, Vol.13, pp.283-291, 2010.
  3. Satoshi IWATA, Mao KURUMATANI, Kenjiro TERADA, Shigenobu OKAZAWA, Kazuo KASHIYAMA, Meso-scale dynamic fracture simulation of concrete in tension under high strain-rate, Journal of Applied Mechanics: JSCE, Vol.12, pp.311-319, 2009.
  4. Shigenobu OKAZAWA, Mao KURUMATANI, Hideyuki TERASAWA, Kenjiro TERADA, Kazuo KASHIYAMA, A study of large deformation solid dynamics using Eulerian finite cover method, Journal of Applied Mechanics: JSCE, Vol. 12, pp. 195-203, 2009.
  5. Tatsuya YUMOTO, Mao KURUMATANI, Masaki YAMADA, Kenjiro TERADA, Takashi KYOYA, A method for evaluating fracture energy of quasibrittle materials using cohesive crack model, Journal of Applied Mechanics: JSCE, Vol. 11, pp. 351-359, 2008.
  6. Mao KURUMATANI, Kenjiro TERADA, Takashi KYOYA, Application of the explicit solution algorithm for cohesive crack model to three-dimensional crack propagation analysis of quasi-brittle materials, Journal of Applied Mechanics: JSCE, Vol.11, pp. 211-220, 2008.
  7. Mao KURUMATANI, Satoshi IWATA, Kenjiro TERADA, Shigenobu OKAZAWA, Kazuo KASHIYAMA, A method of dynamic fracture analysis for quasi-brittle materials by means of cohesive crack model, Journal of Applied Mechanics: JSCE, Vol. 11, pp. 201-209, 2008.
  8. Ikumu WATANABE, Kenjiro TERADA, Verification study of micro-macro decoupling analysis on three dimensional plastic forming problem, Journal of Applied Mechanics: JSCE, Vol. 11, pp. 123-131, 2008.
  9. Tateki ISHII, Kenjiro TERADA, Takashi KYOYA, Effects of frictional slip between crack interfaces to crack growth in quasi-brittle solids, Journal of Applied Mechanics: JSCE, Vol. 10, pp. 343-350, 2007.
  10. Ikumu WATANABE, Kenjiro TERADA, Eduardo Alberto de Souza NETO, Djordje Peric, The importance of finite element performance for characterizing the macroscopic mechanical behavior with two-scale finite element analysis for polycrystalline metals, Journal of Applied Mechanics: JSCE, Vol. 10, pp. 167-174, 2007.
  11. Mao KURUMATANI, Kenjiro TERADA, Image-based nodal-integration finite element method for non-linear analyses of composite materials, Journal of Applied Mechanics: JSCE, Vol. 10, pp. 91-100, 2007.
  12. Masaki YAMADA, Hiroyuki MIYAKOSHI, Kenjiro TERADA, Development of numerical simulator by coupled electro-mechanical analysis of ultrasonic piezoelectric transducer, Journal of Applied Mechanics: JSCE, Vol. 9, pp. 1121-1129, 2006.
  13. Tateki ISHII, Takashi KYOYA, Naoki NISHIZAWA, Kenjiro TERADA, Multiscale analysis for quasi-brittle heterogeneous materials involving micro-crack propagations, Journal of Applied Mechanics: JSCE, Vol. 9, pp. 273-282, 2006.
  14. Mao KURUMATANI, Masahiro ISHIHATA, Tateki ISHII, Kenjiro TERADA, Analysis of crack-paths in concrete due to reinforcement corrosion and their underlying mechanism, Journal of Applied Mechanics: JSCE, Vol. 9, pp. 185-194, 2006.
  15. Tateki ISHII, Kenjiro TERADA, Takashi KYOYA, Yuji KISHINO, Mao KURUMATANI, An application of discontinuous Galerkin finite cover method to discontinuous deformation analysis, Journal of Applied Mechanics: JSCE, Vol. 8, pp. 327-334, 2005.
  16. Ikumu WATANABE, Kenjiro TERADA, Decoupled micro-macro analysis method for two-scale BVPs in nonlinear homogenization theory, Journal of Applied Mechanics: JSCE, Vol. 8, pp. 277-285, 2005.
  17. Mao KURUMATANI, Kenjiro TERADA, Development of discontinuous Galerkin finite cover method and its evaluation, Journal of Applied Mechanics: JSCE, Vol. 8, pp. 215-224, 2005.
  18. Mao KURUMATANI, Kenjiro TERADA, Three-dimensional finite cover method with interface elements, Journal of Applied Mechanics: JSCE, Vol. 7, pp. 441-450, 2004.
  19. Ikumu WATANABE, Atsushi MARUYAMA, Kenjiro TERADA, Masayoshi AKIYAMA, Evaluation of grain effects by multi-scale modeling based on homogenization method, Journal of Applied Mechanics: JSCE, Vol. 7, pp. 365-371, 2004.
  20. Mitsuteru ASAI, Kenjiro TERADA, An analysis of propagating discontinuities by the finite cover method, Journal of Applied Mechanics: JSCE, Vol. 6, pp. 193-200, 2003.
  21. Kai OIDE, Tsuyoshi ICHIMURA, Kenjiro TERADA, Applicability of dual-Schur mortar method to incompatible meshes with different element size and materials, Journal of Applied Mechanics: JSCE, Vol. 6, pp. 175-184, 2003.
  22. Tateki ISHII, Kenjiro TERADA, Takashi KYOYA, Michihiro YAMAGISHI, Yuji KISHINO, Global-local analysis with interface element using voxel model for local heterogeneous structures, Journal of Applied Mechanics: JSCE, Vol. 6, pp. 141-150, 2003.
  23. Isao SAIKI, Shigeri KANKE, Akinori NAKAJIMA, Kenjiro TERADA, Study on multi-scale modeling of plasticity by atomic model, Journal of Applied Mechanics: JSCE, Vol. 6, pp. 123-130, 2003.
  24. Kohei HIGUCHI, Tetsuo IWAKUMA, Takashi KYOYA, Kenjiro TERADA, A finite element of composites in plane strain using an analytical averaging method, Journal of Applied Mechanics: JSCE, Vol. 6, pp. 107-116, 2003.
  25. Tsuyoshi ICHIMURA, Muneo HORI, Kenjiro TERADA, Takahiro YAMAKAWA, Development of Prototype of Integrated Earthquake Disaster Simulator, Journal of Applied Mechanics: JSCE, Vol. 6, pp. 615-622, 2003.
  26. Mao KURUMATANI, Mitsuteru ASAI, Kenjiro TERADA, Application of the finite cover method to elastic-plastic problems and its evaluation, Journal of Applied Mechanics: JSCE, Vol. 6, pp. 247-256, 2003.
  27. Ikumu WATANABE, Kenjiro TERADA, Kazumi MATSUI, Masayoshi AKIYAMA, Yutaka NEISHI, Multiscale analysis for polycrystalline metals, Journal of Applied Mechanics: JSCE, Vol. 6, pp. 239-246, 2003.
  28. Tsuyoshi ICHIMURA, Kai OIDE, Kenjiro TERADA, Muneo HORI, Development of dynamic structure analysis method based on multi-scale analysis, Journal of Applied Mechanics: JSCE, Vol. 5, pp. 535-541, 2002.
  29. Kazumi MATSUI, Kenjiro TERADA, The multi-scale computation method for elastic-plastic heterogeneous bodies with interface debonding, Journal of Applied Mechanics: JSCE, Vol. 5, pp. 227-234, 2002.
  30. Mitsuteru ASAI, Kenjiro TERADA, Multi-scale evaluation method for the strength of heterogeneous brittle materials by means of the material instability theory, Journal of Applied Mechanics: JSCE, Vol. 5, pp. 217-226, 2002.
  31. Kazumi MATSUI, Kenjiro TERADA, Masayosi AKIYAMA, Takashi KUBOKI, Keiichi KUSAKA, Kenjiro OIKAWA, Influence of the micro-structure of carbon steel on the yield stress and the properties of strain hardening, Journal of Applied Mechanics: JSCE, Vol. 5, pp. 175-183, 2002.
  32. Shigeri KANKE, Isao SAIKI, Akinori NAKAJIMA, Kenjiro TERADA, Multi-scale modeling of discrete systems with potential function, Journal of Applied Mechanics: JSCE, Vol. 5, pp. 167-173, 2002.
  33. Mitsuteru ASAI, Kenjiro TERADA, Kiyohiro IKEDA, Michihiro YAMAGISHI, Development of Hybrid-FCM and its application to the analysis of interface fracture in multi-phase materials, Journal of Applied Mechanics: JSCE, Vol. 4, pp. 85-94, 2001.
  34. Ken OOUE, Isao SAIKI, Akinori NAKAJIMA, Kenjiro TERADA, Multi-scale modeling for cellular solids with frame element, Journal of Applied Mechanics: JSCE, Vol. 3, pp. 185-192, 2000.
  35. Isao SAIKI, Kenjiro TERADA, Muneo HORI, Kiyohiro IKEDA, Estimate of microstructural periodicity in multi-scale modeling for macroscopic material instability based on the block-diagonalization method, Journal of Applied Mechanics: JSCE, Vol. 3, pp. 37-45, 2000.
  36. Takashi KYOYA, Kenjiro TERADA, Lizhu OYANG, Hidetoshi NISHIOKA, On evaluation of the mechanical property of composite material by the homogenization method, Journal of Applied Mechanics: JSCE, Vol. 2, pp. 449-458, 1999.
  37. Isao SAIKI, Kenjiro TERADA, Kiyohiro IKEDA, Micro-scale problems with buckling for multi-scale analysis of cellular solids, Journal of Applied Mechanics: JSCE, Vol. 2, pp. 287-294, 1999.
  38. Tomonori SUGANO, Mitsuteru ASAI, Kiyohiro IKEDA, Kenjiro TERADA, Kenshi ODA, Stochastic evaluation method for elastic buckling of truss structures, Journal of Applied Mechanics: JSCE, Vol. 2, pp. 37-42, 1999.
  39. Katsuyuki SUZUKI, Katsuyoshi NAKANISHI, Hideomi OHTSUBO, Kenjiro TERADA, The large deformation analysis of solid structure using voxel cover, Journal of Applied Mechanics: JSCE, Vol. 1, pp. 215-222, 1998.
  40. Tomoyuki UO, Kazuo KASHIYAMA, Kenjiro TERADA, Visco-elastic analysis of asphalt concrete based on homogenization theory using Laplace transform, Journal of Applied Mechanics: JSCE, Vol. 1, pp. 195-202, 1998.
  41. Takashi KYOYA, Kenjiro TERADA, Application of the homogenization method to beam member with periodic structures, Journal of Applied Mechanics: JSCE, Vol. 1, pp. 185-194, 1998.
  42. Kenjiro TERADA, Muneo HORI, Takashi KYOYA, Multi-scale analysis modelling for heterogeneous media, Journal of Applied Mechanics: JSCE, Vol.1, pp.177-184, 1998.
  43. Isao SAIKI, Shinya MURAKAMI, Ikuo SANO, Kiyohiro IKEDA, Kenjiro TERADA, Image Analysis of Shear Bands on Kaolin by Bifurcation Theory, Journal of Applied Mechanics: JSCE, Vol. 1, pp. 15-22, 1998.

Other Journals

  1. Jae Seok CHOI, Jeonghoon YOO, Shinji NISHIWAKI, Kenjiro TERADA, Comparison of homogenization techniques in magnetostatic field problems, Korean Journal of Mechanical Engineers, Vol. 31, No. 3, pp. 288-394, 2007 (in Korean)
  2. Young Seok LIN, Seungjae MIN, Jeonghoon, YOO, Kenjiro TERADA, Shinji NISHIWAKI, Comparative studies of topology optimization using continuous approximation of material distribution, Korean Journal of Mechanical Engineers, Vol. 30, No.2, pp. 167-170, 2006 (in Korean).
  3. Muneo HORI, Tsuyoshi ICHIMURA, Kenjiro TERADA, On standalization of various earthquake resistance design codes for improving government engineering ability, SOCIOTECHNICA, Vol. 2. pp. 444-454, 2004.
  4. Muneo HORI, Tsuyoshi ICHIMURA, Kenjiro TERADA, On generation and convey of earthquake information for promoting earthquake disaster prevention, SOCIOTECHNICA, Vol. 1, pp. 367-373, 2003

Textbooks

  1. K. Terada, T. Ito and N. Kikuchi: Modeling in Geomechanics, M. Zaman, G. Gioda, J. Booker eds., John Wiley & Sons, Chichester, 2000.
  2. K. Terada, N. Kikuchi, Introduction to Homogenization Method, Maruzen, Tokyo, 2003 (in Japanese).
  3. N. Takeuchi, K. Kashiyama, K. Terada, Computational Mechanics ~Fundamentals of Finite Element Methods, Morikita, Tokyo, 2003 (in Japanese).

Selected Papers in Conference Proceedings

  1. Kenjiro TERADA, Noboru KIKUCHI: Elasto-plastic analysis of composite materials by the homogenization method. In: Proceedings of Plasticity '95 (Proceedings of the Fifth International Symposium on Plasticity and Its Current Applications) S. Tanimura, A.S. Khan (Eds.) Gordon and Breach Publishers, pp. 923—926, 1995 [The Fifth International Symposium on Plasticity and Its Current Applications, July 17-21, 1995, Sakai, Japan]
  2. Kenjiro TERADA, Noboru KIKUCHI: Nonlinear homogenization method for practical applications. In: Computational Methods in Micromechanics (Proceedings of 1995 ASME International Mechanical Engineering Congress and Exposition) S. Ghosh and M. Ostoja-Starzewski (Eds.) AMD-212/MD-22, ASME Press, pp. 1—16, 1995 (American Society of Mechanical Engineers, Applied Mechanics Division) [ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, USA
  3. Kenjiro TERADA, Tomohiko MIURA, Noboru KIKUCHI: Digital image-based modeling applied to the homogenization analysis of inetermetallic composites. In: Proceedings of Localized Damage IV: Computer Aided Assessment and Control (The Fourth International Conference; Localized Damage 96) N. Nisitani, C.A. Brebbia, M.H. Aliabadi, S. Nishida (Eds.) Wessex Institute of Technology, pp. 401—408, 1996 [The Fourth International Conference; Localized Damage 96: Computer Aided Assessment and Control, June 1996, Fukuoka, Japan]
  4. Hideomi OHTSUBO, Katsuyuki SUZUKI, Kenjiro TERADA, Katsuyosi NAKANISHI: Utilization of finite covers in the manifold method for accuracy control. In: Proceedings of ICADD-2 (Proceedings of the Second International Conference on Analysis of Discontinuous Deformation) Y. Ohnishi (Ed.) Kyoto University and The Japan Institute of Systems Research, Kyoto, pp. 317—322, 1997 [The Second International Conference on Analysis of Discontinuous Deformation, July 10-12, 1997, Kyoto, Japan]
  5. Takashi KYOYA, Kenjiro TERADA, Yuji KISHINO, Toshikazu KAWAMOTO: Stability analysis of rock mass structures based on a homogenization method and a limit load analysis. In: Computer Methods and Advances in Geomechanics (Proceedings of the Ninth International Conference on Computer Methods and Advances in Geomechanics) J.-X. Yuan (Ed.) Balkema, Rotterdam, Brookfield, pp. 337—342, 1997 [The Ninth International Conference on Computer Methods and Advances in Geomechanics, November 2-7, 1997, Wuhan, China]
  6. Takashi KYOYA, Kenjiro TERADA, Yuji KISHINO: Limit load analysis of rock mass structures combined with a homogenization method. In: Deformation and Progressive Failure in Geomechanics (Proceedings of IS-Nagoya) A. Asaoka, T. Adachi, F. Oka (Eds.) Pergamon, pp. 337—342, 1997. [IS-Nagoya, October 4-7, 1997, Nagoya, Japa
  7. Kazumi MATSUI, Kenjiro TERADA, Takashi KYOYA Tetsuo IWAKUMA: A priori estimate of macroscopic material responses of heterogeneous elastic-plastic body. In: Proceedings of the Advances in Computational Engineering & Sciences, S.N. Atluri and F.W. Brust (Eds.) Tech Science Press, Palmdale, CA, pp. 1104—1109, 2000 [Advances in Computational Engineering & Sciences, August 2000, Anaheim, USA]
  8. Naoki TAKANO, Kenjiro TERADA, Mazaru ZAKO, Tomomi YOSHIOKA: Microstructural analysis of three-Dimensional permeabilities of textile composites by the homogenization theory. In: Design and Manufacturing of Composites  (Proceedings of the Third Joint Canada-Japan Workshop on Composites) S.V. Hoa, H. Hamada, J. Lo, A. Yokoyama (Eds.) Technomic Pub. Co. Ltd., Lancaster, pp. 381—386, 2000 [Third Joint Canada-Japan Workshop on Composites, March 2000, Kyoto Institute of Technology, Kyoto, Japan]
  9. Kiho LEE, Motoki KAZAMA, Eiji YANAGISAWA, Kenjiro TERADA: Permeability characteristics of dredged sludges mixed with crushed oyster shells. In: Coastal Geotechnical Engineering in Practice (Proceedings of the International Symposium – IS-Yokohama 2000) A. Nakase, T. Tsuchida (Eds.) Balkema, Rotterdam, Brookfield, pp. 63—66, 2000 [The International Symposium – IS-Yokohama 2000, September 20-22, 2000, Yokohama, Japan]
  10. Ikumu WATANABE, Kenjiro TERADA: Two-scale characterization of deformation-induced anisotropy of polycrystalline metals. In: Materials Processing and Design: Modeling, Simulation and Applications (Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes) S. Ghosh, J.M. Castro, J.K. Lee (Eds.) American Institute of physics (Vol. 712), Melville, pp. 1595—1600, 2004 [The 8th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 2004) June 13-17, 2004, Ohio State University, Columbus, Ohio, USA]
  11. Kenjiro TERADA , Mitsuteru ASAI: Finite cover method for physically and geometrically nonlinear problems. In: Meshfree Methods for Partial Differential Equations, Lecture Notes in Computational Science and Engineering (Proceedings of the Second International Workshop Meshfree Methods for Partial Differential Equations) M. Griebel, M.A. Sshweitzer (Eds.) Springer-Verlag, Berlin, pp. 169—190, 2004 [The Second International Workshop Meshfree Methods for Partial Differential Equations (Institut für Angewandte Mathematik), September 15–17, 2003, Universitat Bonn, Bonn, Germany]
  12. Mao KURUMATANI, Kenjiro TERADA: A method of multi-physics multi-scale analysis of deterioration of concrete materials. In: Collaboration and Harmonization in Creative Systems (Proceedings of the Third International Structural Engineering and Construction Conference) Takashi Hara (Ed.) Taylor & Francis Group, London, pp.253—260, 2005 [The Third International Structural Engineering and Construction Conference, September 20–23, 2005, Shunan, Japan]
  13. Kenjiro TERADA, Tatsuya KAWADA, Kazuhisa SATO, Fumitada IGUCHI, Kenji YASHIRO, Koji AMEZAWA, Momoji KUBO, Hiroo YUGAMI, Toshiyuki HASHIDA, Junichiro MIZUSAKI, Hidetaka WATANABE, Takashi SASAGAWA, Hiroki AOYAGI, Multiscale simulation of electro-chemo-mechanical coupling behavior of PEN Structure under SOFC operation, ECS Transactions, Vol. 35, No. 1, pp. 923-933, 2011

OTHER CONTRIBUTIONS

Invited Lectures

  1. Plenary Speaker: "Numerical Material and Plate Tests: Advantages and Challenges" (by Kenjiro Terada, Seishiro Matsubara, Shin-nosuke Nishi), XIII International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS XIII), Technical University of Catalonia (UPC), Vertex Building, Barcelona, Spain, 1-3, September 2015.
  2. Keynote Speaker: "Two-scale analysis of composite plates with in-plane periodic heterogeneities" (by K. Terada, S. Matsubara, N. Hirayama), 1st Pan-American Congresses on Computational Mechanics- PANACM, 27-29 April 2015, Buenos Aires, Argentina
  3. Invited Speaker: "Numerical plate testing for composite plates" (by K. Terada, N. Hirayama, K. Yamamoto, S. Matsubara), EUROMECH Colloquium 559 "Multi‐scale computational methods for bridging scales in materials and structures", 23-25 Fbruary 2015, Eindhoven, The Netherlands
  4. Plenary Speaker: "Multi-scale computations diversified: From material to disaster sciences" (by Kenjiro Terada, Shinsuke Takase, Junji Kato, Shuji Moriguchi and Takashi Kyoya), 11th. World Congress on Computational Mechanics (WCCM XI) combined with 5th. European Conference on Computational Mechanics (ECCM V) and 6th. European Conference on Computational Fluid Dynamics (ECFD VI), 20-24 July 2014, Barcelona, Spain
  5. Plenary Speaker: "Computational electro-chemo-mechanics for solids deteriorating at multiple scales", XII th International Conference on Computational Plasticity (COMPLAS XII) ~Fundamentals and Applications~, September 3-5, 2013, Barcelona, Spain.
  6. Keynote Speaker: "Two-scale thermo-electro-chemo-mechanical modeling for durability assessment of SOFC", Euromech Colloquium 537, Multiscale computational homogenization of heterogeneous structures and materials, Marne-la-Vallée, France, 26-28 March 2012
  7. Plenary Speaker: "Characterization of electro-chemo-mechanical deterioration of cermets under SOFC operation", XI th International Conference on Computational Plasticity (COMPLAS XI) ~Fundamentals and Applications~, September 7-9, 2011, Barcelona, Spain
  8. AIMM Keynote Speaker: "Multiscale electro-chemo-mechanical simulation of SOFC under operation", Advances in Structural Engineering and Mechanics (ASEM'11+), September 18-22, 2011, Seoul, Korea
  9. Semi-Plenary Speaker: "Multiscale computational assessment for mechanical deterioration of solid-oxide fuel cell (SOFC)", 9th World Congress on Computational Mechanics (in conjunction with the 4th Asian Pacific Congress on Computational Mechanics) (WCCM/APCOM 2010), July 19-23, 2010, Sydney, Australia
  10. Semi-Plenary Speaker: "Modeling and analysis of macroscopic mechanical deterioration due to time-varying microstructures", IV European Conference on Computational Mechanics (ECCM 2010) -Solids, Structures and Coupled Problems in Engineering-, May 16-21, 2010, Palais des Congres, France
  11. Invited Speaker: "Numerical material testing for strength evaluation of polycrystalline metals", 4th International Conference on Multiscale Materials Modeling (MMM-2008), November 27-31, 2008, Tallahassee, Florida, USA
  12. Keynote Speaker: "Two-scale finite element analysis for deformation-induced anisotropy of polycrystalline metals", International Conference on Computational Methods (ICCM2004), November, 15-17, 2004, National University of Singapore, Singapore
  13. Invited Speaker: "Finite cover method for physically and geometrically nonlinear problems", Second International Workshop Meshfree Methods for Partial Differential Equations, September 15-17, 2003, Bonn, Germany

Awards

  1. IACM Fellows Award (IACM), 2014, Kenjiro Terada.
  2. Kawai Medal (JSCES), 2014, Kenjiro Terada.
  3. Outstanding Paper Award 2006 (JSCES): Mao KURUMATANI, Kenjiro Terada, Junji KATO, Takashi KYOYA, Kazuo Kashiyama, An isotropic damage model based on fracture mechanics for concrete and its evaluation, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2013, p. 20130015, 2013.
  4. Computational Mechanics Achievement Award 2007, JSME Computational Mechanics Division, Kenjiro Terada.
  5. Outstanding Paper Award 2006 (JSCES): "Finite cover method with multi-cover modeling ‐Fracture simulation of quasi-brittle heterogeneous solids‐", Transactions of the Japan Society for Computational Engineering and Science, Paper No. 20060029, 2006, Mao Kurumatani, Kenjiro Terada
  6. Outstanding Paper Award 2002 (JSCES): "Kinematically correct formulation for two-scale finite deformation problems", Transactions of the Japan Society for Computational Engineering and Science, Paper No.20000006,2002
    Kenjiro Terada, Isao Saiki, Kazumi Matsui

Other Services

  1. International Association for Computational Mechanics (IACM)
  2. Asia-Pacific Association for Computational Mechanics (APACM)
  3. The Japan Society for Computational Engineering and Science (JSCES)
  4. Japan Society of Civil Engineering (JSCE) (JSCES)
  5. Japan Association for Nonlinear CAE (JANCAE)
  6. Conference chair and etc.
  7. Editors and etc.


Back to Labs
Computational Mechanics and System Evaluation

↑ Back to top